Bare "P1 Pro Hydraulic Cylinder" (Build Your Kit)

$110.00
Pressure Sensor * 500PSI (Clutch)
Fittings * Include Fittings
Mount * Include Mount

If you're looking for a slave cylinder to replace your Wilwood or Speedway because they're leaking this is for you.

Unfortunately, the big name slave cylinders aren't manufactured with sim racing in mind. Because of this, they aren't built to standards to ensure there are no leaks. 

Leaky slave cylinders are common with some of the other brands available. That is why we built our own here in our facility.

This part is specifically designed for sim racing. Our #1 focus was to build a slave cylinder that will not leak at all. 

Being most simulators are in homes, leaking hydraulics are completely unacceptable. You risk ruining floors or taking paint off your rig. 

We've added o-rings to the shaft to ensure everything stays inside with the addition of a swipe seal right at the end. 

All Sim Coaches products are shipped with a LIFETIME WARRANTY

In The Box: 

(This is A La Carte so what you receive is dependent on what you choose)

1x Sim Coaches Hydraulic Slave Cylinder

+ Options if chosen:

1x Pressure Sensor with Lead (Brake or Clutch)

1x Slave Cylinder Side Mount

1x Fittings 

 

If you want to add springs you can find them as another product listing

Read More
Read Less

SHIPPING POLICY

We keep all our products in stock unless otherwise noted on the site. After you place your order, we'll have it to the shipping center within 1-3 business days. (Unless purchased expedited shipping) All our packages are insured incase there is any problems during shipping. If you do have shipping problems, just send us an email to support@simcoaches.com and we'll get everything solved.

Typical shipping time is 5-7 business days in the United States and 10-15 on International orders. If you want faster shipping we have it available.

RETURNS POLICY

Our return policy is simple. If within the first 14 day's of you playing with your products you're not satisfied, just send us an email to support@simcoaches.com and we'll process your refund no questions asked. You aren't locked in. Play with them, feel them, see how you like them and if they don't meet your expectations let us know.

Frequently Asked Questions

Have a simple question that you need answered? See if it's answered below...
No, these pedals only work on PC as of right now.
With the Lifetime Warranty you are covered under all major repairs. If you experience any kind of problem, send us an email and we'll get you taken care of. (We do not cover obvious intentional damage...)
We use high quality Wilwood Master Cylinders as well as Slave Cylinders. Wilwood makes products for the most expensive super cars in the world and perform at the highest level. They're made to last.
Don't worry! We use DOT 5 which is a silicone based fluid. It's non-corrosive and similar to dropping vegetable fluid. It won't damage your floors or your simulator. Although you shouldn't experience any leaks. Please email support@simcoaches.com to get ahold of us if you are experiencing problems.
The short answer is no. The hydraulic system is sealed very well and it doesn't experience any heat that can speed up the wear. As long as the system isn't messed with, you will find the pedals will go a long time before they require any kind of maintenance at all, if any!

Most Asked Technical Questions

Our most technical questions we receive are listed below. If your questions isn't answered, get ahold of us under the 'Contact Us' page
All pedals and handbrake plug into the throttle pedal that houses the electronics. Then, a USB cable connects to your PC.
Some simulators/games require different calibration processes for them to read the pedals. Please refer to the "How To" section on our site to learn how to calibrate the pedals to your specific sim.
Our hydraulic products come with a bias knob along with "Soft" and "Hard" springs. With the bias knob, you are able to tune your brake between 75 - 500+ lbs of force, Clutch between 50-200lbs of force, and handbrake 50-300lbs of force. This allows you to mimic whatever application you're trying to go for.
Our brake pedal has been tested for over 500LBS of Force. The only reason we couldn't test more is because we were maxed.
Although we cannot guarantee you'll be faster but you'll become more consistent and make much less mistakes. You'll be more comfortable driving the car to the peak of it's limit.

Listen to the review...

Sim racing's finest, Barry Rowland, dove deep into the Sim Coaches P1 Pro pedals and lets you know exactly what he thinks. Cilck the video to learn more...

FREE Hydraulic Bleed

Now when you order from us, all you have to worry about is bolting them on your rig and pluggin them in. We've started bleeding all pedal sets that leave our facility!

This is service is valued at $67 and we're adding it on completely FREE!.

You have successfully subscribed!
This email has been registered